http://www.avermedia.comhttp://www.averdigi.com AVerMedia® SA series (SA5000/6000E/7000H) SA6000E Pro User’s Manual
4 1.4 Features 1.4.1 SA series Features SA6000E series SA7000H series Recording Modes Continuous Recording Smart Recording Motion Recording Aud
94 ranges from 1 to 30 for NTSC and 1 to 25 for PAL. The higher the frame rate, it uses more hard disk space. (6) Video Size User can activate the En
95 cameras, enable the ALL check box. (3) Main Configuration Set the Server IP and Remote Console Port number. The system will automatically detect
96 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number fr
97 3. Specify to either schedule it weekly or one time. Click ~ to make a selection. 4. Click on the blocks to set the schedule (see also Chapter 4
98 out the alarm message. • Abnormal Reboot: when the DVR system reboot in irregular condition, the system will send out the alarm message. • Recor
99 b. Video Size: select the size of snapshot picture. c. Number of picture: the number of picture that is going to be taken. d. Snapshot Interval:
100 (1)(2)(3)(4) To Setup FTP Setting: 1. Beside the File Transmission via FTP check box, click Detail. 2. In the FTP Setting dialog box, enter th
101 To Setup CMS Setting Beside the Send to CMS check box, click Detail. In the CMS Setting, select the camera to enable/disable sending the video to
102 - Click Delete to remove the selected storage path. - Click Schedule to select/unselect the time you want to backup. The red block turns white wh
103 Chapter 11 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM1000) inst
5 Dispatch Server Share transmission loading; enable more clients at remote access & high-speed data transmission. PDA Viewer 4-cam view, full s
104 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain
105 Appendix B Removable Hard Disk Installation Please following the below steps to install the removable hard disk on SA series. If install more tha
106 Appendix C Configure UPnP DVR application support UPnP function that can automatically configure the port setting to the local router. Please mak
107 4. Mark the UPnP Framework check box and click OK.
108 Appendix D Network Service Port The following table shows the ports that DVR server uses for certain network service. Port # Variable Remote Co
Warranty Notice LIMITED WARRANTY AVerMedia® TECHNOLOGIES, Inc. warrants that this product to be free of defects resulting from faulty manufacturing
6 Enlarge camera view Central Management CM3000 Central Management System Remote Access Webcam via regular IE browser Remote Console Smart phone vie
7 1.5.2 Front Panel of SA6032E (1)(2)(3) (4) (5) (6) Name Function (1) DVD-RW To backup recorded file on DVD-R/RW disk (2) SATA Removable HDD Tray
8 Name Function (8) To reset alarm status (9) To start recording video (10) To enable network connection (11) A functional key for multiple
9 Name Function : To enable auto pan function : To move the PTZ camera to the preset poison. Press + number button (1 ~16). : To speed dow
10 Name Function (16) Touch Pad Work as a computer mouse. Using to control cursor on the screen. To open and close touch pad, please follow the ste
11 1.5.4 Back Panel of SA Series SA5104 (4 channels) (2)(4)(7)(8)(9)(10)(6)(1)(3)(5)(12)(11) (1) Port to connect to I/O box (2) 4 audio-in ports
12 SA5116(16 channels) (2)(5)(8)(9)(10)(11)(7)(1)(3)(4)(6)(12)(13) (1) Port to connect to I/O box (2) 4 audio-in ports (3) Video in interface(12
13 SA7000H (1)(2)(5)(6)(7)(8)(3)(4)(9)(10) (1) Sensor and Relay connection interface (2) D-Type AV In port(NV7000H card) (3) TV-Out port (4) VGA
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n
14 1.5.5 Back Panel of SA6000E Pro (1)(2)(3)(10) (9) (8) (7)(6)(5)(4) Name Function (1) CH1~16 Input the video camera signal and display it on ch
15 Chapter 2 Hardware Installation 2.1 SA Series Hardware Installation 2.1.1 Installing Hard Disk AverMedia® SA series can support up to 4 hard di
16 SA5108(8 channels) CRT/LCD MonitorCamera 1 Camera 8Microphone 1Inte r netweb viewer PDA viewer Handy viewerMicrophone 4Pen drive/ External hard di
17 SA6032E CRT/LCD MonitorCamera 1Camera 32Power CordPower OutletMouseKeyboardPen drive/ External hard diskSensorAlarm SA6000E Pro Connecting Device
18 Familiarizing the Remote Control Buttons of SA6000E Pro (2)(1)(4)(3)(6)(8)(18)(17)(16)(5)(7)(9)(11)(10)(12)(13)(14)(15) Name Function (1) Swit
19 Name Function (3) To select the time and date of playback file Fast play the video playback at the speed of 2x, 4x, 8x, 16x or 32x (4) Decrea
20 Name Function (16) ~ A functional key for multiple system control - Press and function button to enable functions + :Switch to singl
21 2 Sensor output signal 1-(GND) 12 Relay Common 2 3 Sensor input signal 2+ 13 Relay Normal Open 2 4 Sensor output signal 2-(GND) 14 Relay
22 2.3.1 SA Series USB PortIR sensor
23 Chapter 3 Using the DVR Software 3.1 Running the Unit for the First Time When the unit is turned on for the first time, the system will prompt y
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR I
24 Name Function (3) Split Screen Mode 16-Cam split display 8-Cam split display 13-Cam split display 32-Cam split display i - If there are
25 Name Function (16) Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ES
26 3.2.1 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main inte
27 3.3 Function Buttons in Playback Mode To switch in Playback mode, click Playback button at the lower right corner of Advanced/Preview mode user i
28 Name Function (5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The numbe
29 3.4 Function Buttons in Compact Mode To view in Compact mode, click Exit button. In the logout dialog box, click Compact. (1) (2) (3) (4) (5) Na
30 3.5 Function Buttons in PTZ Camera Controller Name Function (1) Close Exit PTZ camera controller. (2) Setup Configure PTZ cameras.(see Chap
31 and relay icons to its place on the map. Icons on the map can be relocated anywhere. If you are going to locate the icon on the map to other area,
32 3.8 To Bookmark a Section of the Video 1. Click Bookmark. The video playback stops when the bookmark button is executed. 2. In the Bookmark dia
33 3.10 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (
TABLE OF CONTENTS Chapter 1 Introduction... 1 1.1 Package Co
34 3.11 To Setup the PTZ/IP PTZ Camera 3.11.1 Setup the PTZ Camera 1. In the PTZ control panel, click Setup. 2. When the PTZ Setup dialog box app
35 9. When done, click OK to save the setting or Click Cancel, to leave without saving the new setting. 3.11.2 Setup the IP PTZ Camera 1. In the
36 In Preview mode, user click one channel to switch to full screen and the PTZ control arrow and tool icons will display on the screen. User can cl
37 Chapter 4 Customizing the DVR System In the Preview/Advanced screen mode, click button to customize your DVR. When the DVR configuration setup
38 (3)Language Customize the system to display the tool tips and dialogs based on the selected language. By default the language is in English. (4)
39 Fixed Layout (1) Select the video card channel from drop down list. If user only installs one NV card on the computer, then, there is only one vi
40 Console Setting. To set the text flow and color format, click Advanced. (see also Chapter 4.1.1) (11) UPS (Uninterruptible Power Supply) Protect t
41 (5) Port Setting: Select the Local or Remote port to where it is connected Local - select the COM port number which is connected. Remote – Use th
42 - Name Change the camera name - Description Add a short comment (4) Video Adjustment Adjust the Brightness, Contrast, Hue and Saturation of the
43 2. Enable Detected Regions in Display section. This enables the object counting information show on the screen. Moving Object will enable the obj
3.9 To Search Using the Visual Search...32 3.10 To Search Usin
44 4.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to
45 (4) Motion Detection Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is detected. When it detects a
46 4.3.1 To Mask/Shield an area on the screen 1. In the Mask/Shield Edit section, activate the Enable Mask/Enable Shield check box. 2. In the Ed
47 4.4 Network Setting In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default
48 The Talk to Web-Client is to use the 2-Way Talk feature that allows the client and server to talk via internet using microphone. Make sure both mi
49 4.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number
50 4.5.1 Set schedule at specific portion of time 1. Right click the colored blocks. 2. In the Select time dialog box, click to enable or disabl
51 shows the archived item. To burn the file in CD, you need to have NERO 6 or above installed in your PC then select the item in the list and click
52 4.8 Relay Setting The I/O device must be installed to use this function. To set the Relay Setting: 1. Click the drop-down list and select
53 (1)(2)(3)(4)(5)(6)(7) To set the Alarm Setting: 1. Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm Setting Lis
115 7.2 Familiarizing the WebViewer PTZ Buttons...72 7.3 Familiarizing the
54 • Normal Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message. • Abnormal Reboot: when the
55 ~ Camera # (1~32): the selected channel video that will be enlarged on screen when an alarm is activated. b. Retrieve time: set the waiting dura
56 ~ Camera # (1~32): the selected channel would be snapshot when an alarm is occurred. b. Video Size: select the size of snapshot picture. c. Num
57 4. When the Sound Recorder appears, use the record control panel to record, stop, play, rewind and forward. If you want to keep the existing file,
58 check box and enter User ID and Password. (2) Mail To check if it is working, click Test Account button. From: Enter the sender e-mail address.
59 1. Click Modem Setup button to automatically detect the Modem Baud Rate. 2. In Local Phone Number text box, enter the GSM SIM card phone number.
60 4.9.10 To Setup CMS Setting Beside the Send to CMS check box, click Detail. In the CMS Setting, select the camera to enable/disable sending the v
61 4.9.12 Missing, Suspicious Object, and Scene Change Detected - Missing Object Select the certain object on the screen for the system to detect;
62 - Scene Change When the camera has been moved, the system will alarm. 1. Select the camera number (0-16) and press right button on the mouse to
63 (1)(2)(3)(4)(5)(6)(7)(8) (1) Authorization level Select the status of the user. Only Administrator-level can access User Setting, and reset the Al
1 Chapter 1 Introduction AVerMedia® SA series and SA6000E Pro are standalone DVR units that provide up to 16 channels of hybrid and real-time monito
64 Chapter 5 Backup Video Players You can playback the backup files using QLogViewer and Player applications. When you back up the recorded file, QL
65 Name Function (3) Playback Control Buttons Play: Play the recorded video file. Faster: Play the recorded video file at the speed of 2x, 4x, or 8
66 Name Function (5) Playback Control Buttons Rewind: Wind back the recorded video file. Pause: Briefly stop playing the recorded video file. Play:
67 Chapter 6 Using Functional Keys The DVR system provides shortcut keys. The table shows the function keys and descriptions. Function Keys Descri
68 Chapter 7 Using the Remote Programs You can use Microsoft Internet Explorer to access DVR server by entering the IP address or domain name. To us
69 7.1 Familiarizing the WebViewer Buttons Right-clicking on the webviewer video screen, enables you to start video recording, change video quality,
70 Name Function (15) Select cameras to view Click Add Server and select the server type between DVR and IP Cam to add. Click Delete Server to de
71 (4) Video Adjustment Adjust the Brightness, Contrast, Hue and Saturation of the selected camera. (5) Auto Brightness Control Automatically adjus
72 7.2 Familiarizing the WebViewer PTZ Buttons (4)(3)(2)(5)(6)(1) Name Function (1) Direction buttons Adjust and position the focal point of the
73 7.3 Familiarizing the Remote Console Buttons (1) (3) (8)(7)(6)(5)(4)(9)(10)(12)(13)(14)(15)(2)(11) Name Function (1) Exit Close the Remote Conso
2 (5) F (1)SA6000E Pro unit F (2) Utility Software CD (Manual included) F (3) Remote control(batteries included) F (4) Recovery DVD F (5) Power
74 7.3.1 To Setup Remote Console Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. (1)(2)(3)(4) (1) Stora
75 7.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, choo
76 7.4.1 Familiarizing the Local Playback Buttons (2) (4)(3) (5) (6)(9)(8)(7)(10)(11)(12)(13)(1) Name Function (1) Split Screen Mode Select from s
77 Name Function (6) Preview Switch to Preview/Advanced mode. (7) Playback Switch to Playback mode. This allows you to view the recorded video fil
78 Name Function (4) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow
79 7.4.3 Familiarizing the Download and Playback Buttons (2)(8)(7)(4)(6)(5)(1) (3) Name Function (1) Progress bar Show the progress of the file be
80 7.5 Using Handy Viewer to Access DVR server Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support I
81 7.6.2 To install PDA Viewer from the Internet 1. Make sure you are connected to the internet. 2. Open the web browser and enter the server IP.
82 7.6.3 To Use the PDA Viewer 1. Run the PDA-Viewer 5.5 in the Programs. 2. Familiarizing the PDA Viewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(
83 7.6.4 Using Java-Viewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure y
3 Dimensions (W x H x D) 290*160*480 mm 290*160*480 mm Power 220 Watt 220 Watt Dual-monitor output Optional Yes SA7000H SA6000E Pro Serie
84 7.6.5 To Use the JAVA-Viewer 1. Run the JAVA-Viewer program. 2. Enter the DVR IP address, port number, user ID, and password. Please refer to
85 Chapter 8 Image Verification ImageVerification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot)
86 Chapter 9 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic
87 Name Function (16) Original Screen Display the original state of the image. (17) Temporary Setting Block Display the sample settings. Click th
88 Chapter 10 Web Tools The bundled Web Tools includes Dispatch Server and Remote Backup program. To install Web Tools, place the CD into the CD-ROM
89 10.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. To install Remote Setup application, insert the Installation
90 System Setting In the System Setting windows, click Update to accept the new settings, click Exit to exit without saving, and click Default to rev
91 Play the last file: Automatically playback the video from the last hour Instant Playback: Automatically playback the video which has just recorded
92 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and apply the new
93 Record Setting In the Recording setup windows, click OK to accept the new settings, click Exit to exit without saving, and click Default to revert
Kommentare zu diesen Handbüchern