Avermedia XR8032 Bedienungsanleitung

AVerMedia® XR8032 User’s Manual

4 1.6 Connecting the Sensor/Relay device The I/O card enables you to connect (8) sensor inputs and (8) relay outputs. Just connect the external sens

5 Chapter 2 Using the DVR Software 2.1 Running the Unit for the First Time When the unit is turned on for the first time, the system will prompt yo

6 Name Function (3) Split Screen Mode It provides 7 kinds of split display modes for your selection. You can select one of the split display modes

7 Name Function (16) Full screen Click it to turn to full screen mode. To return, press the right button of the mouse or ESC on the keyboard or cli

8 (1)(2)(3)(4)(5)(6) Name Function (1) POSDB Path The storage path for POS event log. Click to change the storage path. (2) Before/After Set a tim

9 2.3 Familiarizing the Buttons in Playback Mode To switch in Playback mode, click Playback button at the lower right corner of Advanced/Preview mod

10 Name Function (4) Playback Control Buttons Faster: Play the recorded video file at the speed of 2x, 4x, 8x, 16x or 32x. Next: Go to the next fram

11 Name Function You can use this when you are using Intelligent Search or Event Search function. (19) Event Search Search from the recorded activi

12 (5) Advanced Switch to Preview/Advanced mode. 2.5 Familiarizing the Buttons in PTZ Camera Controller (1)(10)(2)(3)(4)(5)(6)(7) (8) (9) Name F

13 camera, sensor, and relay icons to its place on the map. Icons on the map can be relocated anywhere. Right click camera icon can select the camera

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n

14 again. 3. Click Output button to save the wanted clip. 4. In the Save As dialog box, locate on where you want to save the file, type the filen

15 2.10 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

16 2.12 To Setup the PTZ/IP PTZ Camera 2.12.1 Setup the PTZ Camera 1. In the PTZ control panel, click Setup. 2. When the PTZ Setup dialog box ap

17 3. Select the camera number and check the Use PTZ box. 4. In the Connection Settings section, select the Protocol where the PTZ camera is conne

18 Chapter 3 Customizing the DVR System In the Preview/Advanced screen mode, click button to customize your DVR. When the DVR configuration setup

19 time in Expected HD Size or Expected Record time, and then click Calculate button. Click OK to exit the hard disk calculator windows. The hard dis

20 (1)(2)(3)(4) ~ Fixed Layout (1) Select the channel group from drop down list. If only have 16 cameras or less 16 cameras, there is only one chann

21 click Setup. - Beep if no signal Make sound when the video signal is lost. - Mandatory Recording Always recording the video in any condition.

22 2. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving the new setting. (4)(1)(2)(3)(5)(6)(7) (1) P

23 (6) Map to Channel: Select to which camera number to display the transaction text (7) Text Filter : Enter the word you want to be removed

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR I

24 3.2 Camera Setting In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default t

25 - Authentication: Mark check box and enter the ID and password for authorizing to connect the camera. Only if the camera has assign the ID and pa

26 (10) Video Adjust the video setting of the selected camera. Click Video Setting to enter video adjustment interface. - Video Setting Adjust the

27 (12) Sensor Setting To setup sensor that is embedded on the camera. 1. Click the drop-down list and select the sensor ID number. 2. Enter sen

28 3.2.1 Setup the Object Counting 1. Click Detail to enter the object counting setup window. 2. Enable Detected Regions in Display section. This e

29 without saving, and click Default to revert back to original factory setting. (8)(9)(10)(7)(1)(2)(3)(4)(5)(6) (1) Camera Icons Select the camera

30 (5) Frame Rate Set the maximum number of frames to be recorded during motion and motionless state. The frame rate ranges from 1 to 30 for NTSC and

31 3. Click and drag a frame on the (7) Video Screen to create Mask or Shield area. i Shield is only available when user selected “Transcode by MPEG

32 3.4 Network Setting In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default

33 using this feature. If the Talk to Web-Client is disabled, the person in the DVR server side can only hear the voice from the client side that is

TABLE OF CONTENTS Chapter 1 Introduction... 1 1.1 Package Contents .

34 3.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number

35 3.5.1 Set schedule at specific portion of time 1. Right click the colored blocks. 2. In the Select time dialog box, click to enable or disabl

36 9. In CD/DVD Backup, enable/disable Delete file after burning check box to remove the archived file after burning. Click Burn to start and Exi

37 3.7.1 To Setup External I/O Box The DVR system can connect the external I/O box for more installed of I/O devices. 1. Click Add. 2. Mark Enable

38 9. All connected relays and sensors will be listed. User can click radio button to control relays’ status. And then, click OK to save the settin

39 11. To view the all I/O devices information, click I/O Map. 3.8 Relay Setting The I/O device must be installed to use this function. To set the R

40 )(7(1)(2)(3)(4)(5)(6) To set the Alarm Setting: 1. Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm Setting Lis

41 - Enable/disable the Abnormal Event check box, to set the condition of the event for system to alarm. • Normal Reboot: when the DVR system reboo

42 normal status is high, set the sensor condition to low. Click IP Cam Sensor to IP camera sensor reset condition. Click High or Low column to set

43 Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see also 3.9.5). - Start Recording Record the video from

3.8 Relay Setting ... 39 3.9 Alarm Setting

44 3.9.2 To Setup the Alarm Sound Setting: 1. Beside the Play Warning Sound check box, click Detail. 2. In the Alarm Sound Setting dialog box,

45 you have microphone connected to your PC. 6. The supported audio system is only 8KHz and 16Bit mono. 7. Click OK to exit and accept the setting a

46 sensor is triggered. 5. Click OK to exit and save the setting and Cancel to exit without saving the setting. 3.9.6 To Setup Alarm Recording Set

47 3.9.9 To Setup Alarm SOP: Beside the Alarm SOP check box, click Detail. In the step text boxes, type the standard protocol when the alarm is act

48 3.9.12 Missing and Suspicious Object Detected - Missing Object Select the certain object on the screen for the system to detect; when the obje

49 2. Click Save to capture the image for comparing reference. To view the captured image, enable the Show Reference Image check box. The captured im

50 3.10 User Setting Only administrator can access User Setting. The maximum user accounts are 256. In the User Setting dialog box, click Add to inse

51 (4) Visible Camera Select the camera number that would allow the user to access or view. To select all the cameras, enable the ALL check box. (5)

52 Chapter 4 Backup Video Players You can playback the backup files using QLogViewer and Player applications. When you back up the recorded file, QL

53 Name Function (3) Playback Control Buttons Slower: Play the recorded video file at the speed of ½x, ¼x, or ⅛x. Rewind: Wind back the recorded vid

Chapter 9 Web Tools... 76 9.1 Dispatch Server ...

54 Name Function (3) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. (4) Hour B

55 Chapter 5 Using Functional Keys The DVR system provides shortcut keys. The table shows the function keys and descriptions. Function Keys Descrip

56 Chapter 6 Using the Remote Programs You can use Microsoft Internet Explorer to access DVR server by entering the IP address or domain name. To us

57 6.1 Familiarizing the WebViewer Buttons Right-clicking on the webcam video screen, enables you to start video recording, change video quality, sw

58 Name Function (13) Snapshot Capture and save the screen shot in *.bmp format. (14) Full screen Use the entire area of the screen to only displ

59 Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record the video and preview it in playback mod

60 Name Function (4) Camera preset position number Move the PTZ camera to the preset point. (5) Zoom +/- Zoom in and out the image. (6) Focus +/-

61 6.3 Familiarizing the Remote Console Buttons (1) (3) (8)(7)(6)(5)(4)(9)(10)(12)(13)(14)(15)(2)(11)(16) Name Function (1) Exit Close the Remote C

62 Name Function (14) Full screen Use the entire area of the screen to only display the video. To return, Right click the mouse or press ESC on the

63 6.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, ch

1 Chapter 1 Introduction AVerMedia® XR8032 is a standalone DVR unit that through the network to receive video and monitoring and recording of vid

64 selected hour into 16 video thumbnails. In the Time Selection screen, click on the video thumbnail you want to download and open (see also 6.4.2).

65 Name Function (4) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow

66 6.4.2 Familiarizing the RealTime Playback Buttons (2) (4)(3) (5) (6)(9)(8)(7)(10)(11)(1) Name Function (1) Split Screen Mode Select from two (2)

67 Name Function (6) Preview Switch to Preview/Advanced mode. (7) Playback Switch to Playback mode. This allows you to view the recorded video fil

68 Name Function (5) Print Print the screen shot. (6) Save Save the screen shot either in *.jpg or *.bmp format and video in *.dvr format. (7) Seg

69 3. Read the license agreement and click Yes to accept all the terms. The system will then automatically install the application. 4. When you ar

70 6.6.3 To Use the PDA Viewer 1. Run the PDA-Viewer 5.5 in the Programs. 2. Familiarizing the PDA Viewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(

71 6.7 Using Java-Viewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure yo

72 4. Click Yes to accept the data from DVR server. 5. When connection is success, you will see the camera video on the screen. 6. To switch to d

73 Chapter 7 Image Verification ImageVerification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot)

2 1.3 Back Panel (2) (1)(4)(7)(8)(3)(5)(9) (6)(10)(11) Name Function (1) Audio Out Output the audio of the selected video channel i The audio outp

74 Chapter 8 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic

75 Name Function (14) Effects • Gray Scale: convert the image into black and white (monochrome). • Normalize: adjust the brightness intensity. • Eq

76 Chapter 9 Web Tools The bundled Web Tools includes Dispatch Server and Remote Backup program. To install Web Tools, place the CD into the CD-ROM

77 4. In the Add New DVR windows, enter the Name, IP, user ID, and password. 5. Select the Backup mode: Auto Backup mode: the backup will automatic

78 7. Click Start to begin backup and click Stop to stop backup progress. 8. For manually backup, click file select button and select the D

79 Chapter 10 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM1000) insta

80 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain

Warranty Notice LIMITED WARRANTY AVerMedia® TECHNOLOGIES, Inc. warrants that this product to be free of defects resulting from faulty manufacturing

3 CRT/LCD MonitorMicrophoneInte r netweb viewerSwitchSensor 1Sensor 8Alarm 1 Alarm 8IP Camera 1 IP Camera 32Pen drive/ External hard diskCCTV Monitor