Avermedia EXR6004 Bedienungsanleitung PDF herunterladen (Seite 41)



Using the following IP address:

Assigns an IP address for the DVR system. Fill in the IP related

parameters in

IP information

section.

IP:

Assign a constant IP address which a real IP address gives from ISP to DVR system.

Mask:

It is a bitmask used to identify the sub network and how many bits provide room for host

addresses. Enter the subnet mask of the IP address which user has assigned to DVR system.

Gateway:

A network device acts as a passageway to internet. Enter the network gateway IP

address

User only can setup one gateway for the DVR system. We do recommend setting the gateway data in port

LAN 2 because port LAN 2 can access to internet.

DNS:

Domain Name Server translates domain names (such as www.abb.com.tw) to IP addresses.

Enter the IP address of DNS if it is available.

MAC Address:

An identifier hardware address of DVR unit that is assigned by the manufacturer

for identification. User don’t need to fill in, it will generated by system automatically.



Obtain an IP automatically (DHCP):

Assign the IP address by local DHCP server to DVR system.



PPPOE:

Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in

Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service

connecting to internet, and then, select PPPOE mode. Enter

User ID

and

Password

that is given by

your ISP for PPPOE connecting authority.



DDNS:

DDNS(Dynamic Domain Name Service) is a data query service mainly used on the Internet

for translating domain names into Internet addresses. Users can register their own domain name on

http://ddns.avers.com.tw

. (See Appendix A)

Domain Name

Enter the domain name that user has registered.

Password

A password use to access DDNS that user has setup when register the domain name

DDNS Server Name

Select your DDNS server. The default only has one DDNS server now. It may provide more DDNS

in future.

DDNS Server Port

Fill in the port that connects to DDNS server. Default is 1053.

(4) Remote Upgrade Configuration

A port is using for the remote firmware upgrade through network.

(5) WebViewer Configuration

Activate Enable Anonymous Login to remotely access the DVR server without the need of password.

Fill in the WebViewer PORT for remote accessing connection.

(6) Network Time Synchronization

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 116 117

Kommentare zu diesen Handbüchern

Keine Kommentare

Avermedia EXR6004 Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Avermedia EXR6004